SHED 2
Double Thread Bag Closing Machine
NFIC-KUP-U07-01
Machine at a glance
Unit
Unit 7 — Storage & Material Handling
Shed / location
SHED 2
Manufacturer
Suga Agro Tech
Actual capacity / range
Minimum 150 Bags/hour under standard operating conditions
Actual power
Maximum 0.25 HP, Single Phase
What this machine helps make
No validated product/technology mappings are currently available for this machine.
Operating SOP
1. Pre-operation checklist
• Check needle and thread — replace when skipping or breaking
• Test stitch on waste bag before production run
• Test stitch on waste bag before production run
2. Start-up procedure
1. Feed bag mouth through machine steadily — keep bag taut
2. Stitch length must be consistent
2. Stitch length must be consistent
3. Operating steps / parameters
1. Feed bag mouth through machine steadily — keep bag taut
2. Stitch length must be consistent
3. Inspect every 10th bag for stitch quality
2. Stitch length must be consistent
3. Inspect every 10th bag for stitch quality
4. Shutdown procedure
No separate shutdown step stated on the source card; follow the post-operation checklist.
5. Cleaning / sanitation
• Store machine in DRY place when not in use — portable machine
• Log: product | bags closed | any stitch quality issues
• Log: product | bags closed | any stitch quality issues
6. Safety / PPE
• No special safety rule — follow standard PPE
7. Troubleshooting
Needle breaking or skipping consistently — replace needle before continuing
8. Preventive maintenance
Routine prevention is embedded in the pre-operation and post-operation checks; no separate time-based preventive-maintenance interval is stated on the source card.